Ρτ 18354 in 1/87

Ρτ 18354 in 1/87

Postby BarbaPanagos » Tue Apr 02, 2019 5:53 pm

We go on with another old German Tank in model. Ρτ 18354
Tim has posted a great photo here viewtopic.php?f=13&t=13&start=10
and Tasos (ANAROUS) has created with Christo's help a really nice set of decals.


Ρτ 18354.jpg



The model is from Tillig (old Sachsen model) and comes in many different liveries. The one I used is Tillig 76679
note that some modification will be needed, mostly at the ladder handrails and the reposition of the side panels.


Tillig 76679.jpg


First I painted the tank and ladder with Vallejo primer and when it was set, I applied the old good MOLAK 7004.
it's part of a rail color series made for ROCO and has a RAL 1004.


Ρτ 18354 HO 01.jpg
User avatar
BarbaPanagos
 
Posts: 1722
Joined: Wed Jun 05, 2013 6:21 pm

Re: Ρτ 18354 in 1/87

Postby christo » Tue Apr 02, 2019 6:29 pm

I WANT ONE TOO!!!

christo.
User avatar
christo
Site Admin
 
Posts: 2926
Joined: Wed Jun 05, 2013 2:23 pm
Location: Forest Row, Sussex, U.K

Re: Ρτ 18354 in 1/87

Postby BarbaPanagos » Tue Apr 02, 2019 8:40 pm

:D :lol: that was your comment for the Ρπτ 118469 too!!!
User avatar
BarbaPanagos
 
Posts: 1722
Joined: Wed Jun 05, 2013 6:21 pm

Re: Ρτ 18354 in 1/87

Postby christo » Tue Apr 02, 2019 9:30 pm

I want everything. Too greedy for good Greek models :oops: .

christo.
User avatar
christo
Site Admin
 
Posts: 2926
Joined: Wed Jun 05, 2013 2:23 pm
Location: Forest Row, Sussex, U.K

Re: Ρτ 18354 in 1/87

Postby BarbaPanagos » Wed Apr 03, 2019 2:55 pm

here are the modifications that we have to do on the model for a closer to the prototype result.

Tillig 76679v.JPG



The marking plates have to change place as at the original, the smaller is at the left, while the bigger one is at the right of the wagon.
So, a new opening has to be made on the metal parts to allow the bolt that holds the superstructure to the frame.
Also a photo etched "documents holder" has been added.

Ρτ 18354 HO 02.jpg



The top hand rails have been shortened and the ladder handrails have been replaced by 0.5 mm fishing line secured with superglue.

Ρτ 18354 HO 03.jpg
User avatar
BarbaPanagos
 
Posts: 1722
Joined: Wed Jun 05, 2013 6:21 pm

Re: Ρτ 18354 in 1/87

Postby NPS » Thu Apr 04, 2019 8:47 pm

Excellent job!!!
Congratulations Panayioti !!
NPS
 
Posts: 10
Joined: Sat Jan 13, 2018 1:44 pm

Re: Ρτ 18354 in 1/87

Postby BarbaPanagos » Fri Apr 05, 2019 4:13 pm

Thanks Nick :D

Last modification is the replacement of the buffers with the white metal parts that Andreas provided us.
It's a great improvement compared to the original one at the bottom.

Ρτ 18354 HO 04.jpg
User avatar
BarbaPanagos
 
Posts: 1722
Joined: Wed Jun 05, 2013 6:21 pm

Re: Ρτ 18354 in 1/87

Postby BarbaPanagos » Sun Apr 21, 2019 10:52 am

I recently had the chance to see more shots of the original wagon from Stefanos Goulakos collection. Thanks to him, I cleared a couple points and decided to make some more conversions that I initially had tried to avoid :mrgreen:

first I found out that at both sides the bigger boards were closer to the brake post
so the model parts have to be cut and regrouped again...

Ρτ 18354 HO 07.jpg



Something that I had already spotted was that the ladder seemed to be closer to the rear than it is at the model.
I initially decided not to model that as it needed some major cutting and filling
Looking at the photos though and the hatch position, I realized that the tank had been placed the other way round! the hatch being closer to the rear.
So I'm giving it a try...

Ρτ 18354 HO 05.jpg

Ρτ 18354 HO 06.jpg


the more observant will note that the platform seems a bit wider, but I refuse to alter this point too! I'd have to make from scratch the whole thing...
A 95% accuracy, I think, has been already achieved :D

...
User avatar
BarbaPanagos
 
Posts: 1722
Joined: Wed Jun 05, 2013 6:21 pm

Re: Ρτ 18354 in 1/87

Postby christo » Sun Apr 21, 2019 11:51 am

I think you should change your forum name to Exactopanagos :lol: . You are unbelievable BarbaP, well done!

christo.
User avatar
christo
Site Admin
 
Posts: 2926
Joined: Wed Jun 05, 2013 2:23 pm
Location: Forest Row, Sussex, U.K

Re: Ρτ 18354 in 1/87

Postby Andreas » Mon May 06, 2019 1:51 pm

Exactopanagos :lol:


PanagosProto87 or Protopanagos87 :lol: :lol: :lol: :lol: :lol:
Andreas
 
Posts: 336
Joined: Tue Jun 11, 2013 2:29 pm
Location: Zurich, Switzerland

Next

Return to Members Modelling Projects, Layouts & Collections

Who is online

Users browsing this forum: No registered users and 1 guest

cron